1969 Chevrolet Camaro ZL-1 Custom

View this vehicle on our site for a total portrayal, cost, and numerous photographs.

This lovely 1969 Chevrolet Camaro RS Custom ZL-1 w/625HP is complete beautiful sight and a definitive ace visiting G-machine. This is a genuine “Genius Touring” vehicle with demonstrated Autocross experience which is recorded. This vehicle was worked with some top of the line parts to perform at a significant level. As the receipts archive an aggregate of $143,000.00 was put resources into this vehicle and that is with a very low work rate. The vehicle sports the most delightful shade of Blue on the outside alongside a marginally custom dark inside. It has an incredible position on Budnik Shotgun wheels with Dunlop tires.

The motor compartment and underside is profoundly nitty gritty all through. The vehicle is controlled by a fuel infused GM Performance ZL1 Aluminum 489 V8 motor w/625HP and a T-56 Magnum 6-speed manual transmission. It has been highlighted in three magazines and has won numerous honors.

The outside of this vehicle is complete sight to behold with its delightful plan and shading plan. This vehicle unquestionably has the pop factor that pulls in a huge load of consideration. The body is truly straight and it has truly decent hole lines all through. The vehicle has another steel cowl hood, front spoiler, back spoiler and “RS” style fog light setup.The paint was as of late point by point to a splendid sparkle. The blue tone is supplemented with silk dark accents which can be found on the front grille, lower quarter trim and back tail board. The entirety of the glass is new and delicately colored all through. A portion of the custom outside highlights incorporate Detroit Speed windshield wiper engine, Detroit Speed electric headlights, front tow snare, back taillight bezels and ZL1 symbols on the grille, bumpers and back tail board. The vehicle is an incredible position on specially assembled Budnik Shotgun wheels that are cleaned with a brushed focus. The front wheels are 18″ and the back tires are 19″.

The inside of this vehicle is vehicle is the ideal mix of unique and custom. The whole inside was stripped to an exposed shell during the reclamation and covered with B-Quiet stable stifling. This material keeps the warmth and outside sound out of the lodge. The tone was changed from Black Houndstooth to all Black. A portion of the inside custom highlights incorporate a Ridetech “Tiger Cage” move vehicle that eliminates to access secondary lounges, Autowire wiring tackle, back see reflect, run bezel, Autometer Ultralite carbon fiber checks, Detroit Speed billet handles, oil temp measure in debris plate, slant directing section with billet stalks, Budnik “G10” controlling wheel, focus comfort with carbon fiber move bezel, calfskin boot, Hurst shifter, switches, cup holders and capacity compartment, Arizen Racing cowhide can seats, Sparco 4-point bridle, coordinating with back seat with safety belts, penetrated entryway and window wrenches, aluminum pedals and thick covering with custom Camaro decorated floor mats.

The motor compartment is profoundly itemized all through with numerous custom segments. The rear of the hood was painted the body shading which looks incredible. The hood has a chrome hood lock spring and Detroit Speed aluminum hood pivots. A bunch of Fesler aluminum bumper supports were added which additionally look extraordinary. It has a custom Autorad radiator uphold that was power covered silk dark to coordinate with the firewall. The entirety of the hoses are isolated with custom separators and have heat recoil cinches. The vehicle is controlled by a fuel infused GM Performance ZL1 aluminum 489 V8 motor w/625HP. It was fabricated and blueprinted by Pettis Performance. It’s 10.4:1 pressure so it runs on 91+ octane siphon gas. It starts and runs like a little square. It’s furnished with Brodix aluminum heads, a street dashing high-limit oil skillet and a custom pulley framework. It’s likewise furnished with an Accusump Oil gatherer framework for pre-startup oiling which keeps away from wear on the motor over the long haul.

The Holley Avenger electronic fuel infusion arrangement is truly outstanding available. A PC for programming and tuning is incorporated. It has Aeromotive Stealth gas tank, Aeromotive fuel framework parts, full PTFE fuel lines, II Much Fabrication fuel vent so there will never be any gas smells. The motor inhales through Hedmann Hedders artistic headers and Magnaflow exhaust framework that was wrapped with heat tape in areas. This stunning cooling framework stays at 190 degrees. The motor is coupled perfectly 56 Magnum 6-speed manual transmission with overdrive. It has a Centerforce DYAD 1000HP double plate grasp, short-toss Hurst shifter, QuickTime SFI bellhousing, SpeedTech cross part and GM Hydraulic grip framework. The force is turned through a QA-1 carbon fiber driveshaft which is 12 pounds lighter than a steel driveshaft and observably better.